Question 1

Are you licensed and insured in Maryland, DC, and Virginia?

Accepted Answer

Yes. Flash Power LLC carries licensed electrician licensing and full liability and workers' comp insurance for Maryland, Washington DC, and Northern Virginia. We pull permits on every job that requires one.

Question 2

Do you offer free estimates?

Accepted Answer

Yes — every installation and upgrade quote is free, with no obligation. We arrive on time, walk the project with you, and send a written estimate the same day.

Question 3

How fast can you get to my home?

Accepted Answer

Most calls placed before noon receive same-day service in our core MD, DC, and Northern VA areas. New estimates are typically scheduled within 1–3 business days.

Question 4

Do you handle permits and inspections?

Accepted Answer

Always. We pull the permit, schedule the county or city inspection, and meet the inspector on-site. You receive copies of the closed permit for your records and resale value.

Question 5

What payment methods and financing do you accept?

Accepted Answer

We accept all major cards, ACH, and check. Financing is available for panel upgrades, generators, and EV chargers — ask your estimator for current promotions.

Question 6

Do you warranty your work?

Accepted Answer

Yes. Labor is warrantied for 1 year on repairs and up to 5 years on major installations, on top of the manufacturer warranty for parts and equipment.

Question 7

How do I schedule an electrician?

Accepted Answer

Call (202) 926-7065 or submit our online quote form. We respond within one business hour Mon–Sat and confirm a time window before dispatch.

Question 8

Do you charge a service-call or trip fee?

Accepted Answer

No trip fees for free estimates. Diagnostic calls carry a flat dispatch fee that is credited toward the repair if you proceed the same day.

Question 9

Can you provide proof of license and insurance?

Accepted Answer

Yes — we share our licensed electrician license numbers and certificates of insurance on request, including additional-insured endorsements for HOAs and property managers.

Question 10

How do I know if my electrical panel needs an upgrade?

Accepted Answer

Common signs: 100A or smaller service, federal Pacific / Zinsco / Challenger brand panels, frequent breaker trips, no room for new circuits, or planning EV/HVAC/heat-pump loads. We provide load calculations during the free estimate.

Question 11

How long does a 200A panel upgrade take?

Accepted Answer

Most residential 200A upgrades complete in a single day — typically 6–9 hours including permit close-out. Utility coordination for service-mast or meter relocations can add a day.

Question 12

Do you handle the permit and utility coordination?

Accepted Answer

Yes. We pull every permit, schedule the county/city inspection, and coordinate Pepco, BGE, or Dominion power cuts. You receive the closed-permit copy for resale and insurance.

Question 13

What's the difference between 200A and 400A service?

Accepted Answer

200A handles most single-family homes including one EV charger and a heat pump. 400A is recommended for large homes, dual EV chargers, in-law suites, pools/spas, or whole-home backup generators.

Question 14

Which EV chargers do you install?

Accepted Answer

We install Tesla Wall Connector, ChargePoint, Wallbox, JuiceBox, Emporia, Ford Charge Station Pro, Rivian, and any hardwired Level 2 unit a customer provides.

Question 15

How much does EV charger installation cost in the DMV?

Accepted Answer

Most Level 2 installs run $850–$2,200 depending on panel capacity, run distance, and conduit routing. We always provide a free written estimate before work begins.

Question 16

Do I need a panel upgrade for an EV charger?

Accepted Answer

Not always. We run a load calculation first — many 200A homes accept a 40–50A EV circuit. Older 100A panels often need an upgrade or a smart-splitter device.

Question 17

Can you install two EV chargers on one home?

Accepted Answer

Yes — using a dual-charger load-share kit or a 400A service. We size everything to NEC 625 to keep your warranty and insurance intact.

Question 18

Why does my breaker keep tripping?

Accepted Answer

Common causes: overloaded circuit, damaged appliance, loose neutral, or a ground fault on a wet-area circuit. We trace and repair the root cause rather than just resetting the breaker.

Question 19

Are flickering lights dangerous?

Accepted Answer

Whole-house flicker often indicates a loose service neutral — a serious safety issue that warrants a same-day visit. Single-room flicker is usually a bad switch, dimmer mismatch, or loose wire.

Question 20

Do I need AFCI and GFCI protection in my home?

Accepted Answer

Current code requires AFCI on most living-space circuits and GFCI on kitchens, baths, garages, laundry, outdoor outlets, and pool equipment. We upgrade legacy panels to meet today's standards during repairs.

Question 21

What is whole-home surge protection?

Accepted Answer

A panel-mounted Type-2 surge protector that defends every circuit in the house against grid spikes and lightning-induced transients — critical for EV chargers, HVAC boards, and electronics.

Question 22

How much does recessed lighting cost per can?

Accepted Answer

Most LED retrofit cans install for $95–$165 each, with quantity discounts. New construction with attic access is typically less; finished ceilings with insulation more.

Question 23

Do you install Lutron Caseta and smart panels?

Accepted Answer

Yes — Lutron Caseta, RA3, Leviton Decora Smart, and panel-level systems like SPAN and Leviton Load Center. We program scenes before leaving the job.

Question 24

Can you install landscape and outdoor lighting?

Accepted Answer

Yes — low-voltage path lighting, soffit lighting, security flood lights, and wet-location dimmable systems are all installed with proper photocell or timer control.

Question 25

Do you handle commercial tenant fit-outs?

Accepted Answer

Yes — we work with general contractors on Class-A office, medical, retail, and restaurant fit-outs across the DMV, including night and weekend hours to hit landlord schedules.

Question 26

Do you offer scheduled preventative maintenance?

Accepted Answer

Yes — annual thermal scans, panel torque audits, GFCI/AFCI testing, exit-light certification, and emergency-lighting inspection plans for businesses and HOAs.

Question 27

Can you respond to commercial emergencies after hours?

Accepted Answer

Yes — 24/7 commercial emergency dispatch for power loss, breaker faults, and life-safety circuits. Call (202) 926-7065 anytime.

Question 28

What size standby generator do I need?

Accepted Answer

A typical 3,000–4,500 sqft DMV home runs well on a 22–26kW Generac or Kohler air-cooled unit. Larger homes with two HVAC systems or EV charging may need 30–48kW.

Question 29

How long does generator installation take?

Accepted Answer

Most whole-home installs complete in 2–3 days once equipment, gas line, and county permit are in place. Commissioning and load test happen on the final day.

Question 30

Do you offer financing?

Accepted Answer

Yes — we offer 0% promotional financing on qualifying panel upgrades, EV chargers, and generators through industry-standard lenders. Ask your estimator.

Question 31

What payment methods do you accept?

Accepted Answer

All major credit cards, ACH transfer, and check. Deposits are typical on installation projects; repairs are billed on completion.

Question 32

How long is the warranty on your work?

Accepted Answer

1-year labor warranty on repairs, up to 5 years on major installations (panels, EV, generators), plus the full manufacturer warranty on parts and equipment.

Electrical questions, answered.

General & Booking